74ACT823SPC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Supplier Device Package | 24-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 158MHz |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACT823SPC Overview
24-DIP (0.300, 7.62mm)is the packaging method. A package named Tubeincludes it. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ACT series. There should be no greater frequency than 158MHzon its output. A total of 1elements are contained within it. Despite external influences, it consumes 80μAof quiescent current. The 74ACT823 family contains this object. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
74ACT823SPC Features
Tube package
74ACT series
74ACT823SPC Applications
There are a lot of ON Semiconductor 74ACT823SPC Flip Flops applications.
- Power down protection
- Consumer
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29
- Counters
- Test & Measurement
- Frequency Dividers
- Supports Live Insertion
- Memory
- Computing
