74ACT841MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT841 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Number of Circuits | 10 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 10 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 10 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 5.5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT841MTCX Overview
In the 24-TSSOP (0.173, 4.40mm Width) package, it is embedded. Packaged in the way of Tape & Reel (TR). It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. It is a type of FPGA belonging to the 74ACT series. 10 Bits are used in the design of this electronic part. The family it belongs to is 74ACT841. The 24 pins are designed into it. Mounting this electronic component follows the Surface Mount method. Input Lines consist of electronic circuits, and there are 10. Optimal efficiency requires 5V as the supply voltage. Input lines are generated as binary equivalents by 3 output lines. It consists of 1 elements. The circuit's superior flexibility is achieved through the use of 10 circuits. There is 24mA output current at the low level. -24mA is set as the high level output current. A temperature below 85°C should be used for operation. Temperatures higher than -40°C should be used for operation. The supply voltage is limited to 5.5V. This device requires a minimum voltage of 4.5V.
74ACT841MTCX Features
24-TSSOP (0.173, 4.40mm Width) package
74ACT series
10 Bits
74ACT841 family
24 pins
1 elements
74ACT841MTCX Applications
There are a lot of ON Semiconductor 74ACT841MTCX Latches applications.
- Serial Output Register
- Digital bus buffer
- Decade counting
- Parallel-to-Serial Data Conversion
- Parallel Output
- Instrumentation
- Multistage ripple counting
- Automotive Infotainment
- Network Switches
- Address register
