74ACT843SPC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | MATTE TIN |
| Additional Feature | WITH CLEAR AND PRESET |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Family | ACT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 5.5ns |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACT843SPC Overview
In the 24-DIP (0.300, 7.62mm) package, it is embedded. Tube is the way in which it is packaged. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Through Hole, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. There are a number of FPGAs in this series, including this one. 9 Bits are used in the design of this electronic part. This device has been designed with 24 terminations available. The supply voltage of the device is 5V. The 24 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of ACT. This device is equipped with 2 ports. There is a maximum voltage supply (Vsup) that reaches 5.5V. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. In addition, WITH CLEAR AND PRESET characterize it.
74ACT843SPC Features
24-DIP (0.300, 7.62mm) package
74ACT series
9 Bits
24 pin count
74ACT843SPC Applications
There are a lot of Rochester Electronics, LLC 74ACT843SPC Latches applications.
- Four-bit storage with output enable
- Parallel-to-Serial Data Conversion
- Ring counter
- Buffer register
- Accumulator Registers
- Multistage ripple counting
- BCD counting
- Stacked or Push-Down Registers
- Shift Registers
- Hammer
