banner_page

74ACT843SPC

D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74ACT Series 74ACT843 24-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACT843SPC
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 479
  • Description: D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74ACT Series 74ACT843 24-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Supplier Device Package 24-PDIP
Operating Temperature -40°C~85°C
Packaging Tube
Published 2000
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACT843
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 9:9
Polarity Non-Inverting
Number of Circuits 9
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 9
Propagation Delay 9.5 ns
Turn On Delay Time 5.5 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 9
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 5.5ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ACT843SPC Overview


Package 24-DIP (0.300, 7.62mm) includes it. The package is in the form of Tube. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. The 74ACT series contains FPGAs of this type. 9 Bits are used in the design of this electronic part. It belongs to 74ACT843 family. In addition, it is designed with a pin number of 24. Mounting this electronic component follows the Through Hole method. An electronic circuit can be found on 9 input lines. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines generate the binary equivalent of the input lines. It consists of 1 elements. It achieves superior flexibility by using 9 circuits. There is 24mA output current at the low level. In the high level output current, the value is set to -24mA. Operating temperatures should be below 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It supports the maximal supply voltage of 5.5V. It operates with the minimal supply voltage of 4.5V.

74ACT843SPC Features


24-DIP (0.300, 7.62mm) package
74ACT series
9 Bits
74ACT843 family
24 pins
1 elements

74ACT843SPC Applications


There are a lot of ON Semiconductor 74ACT843SPC Latches applications.

  • Flip-flops
  • Communication systems
  • Network Switches
  • General-Purpose Register
  • Decade counting
  • Parallel Input
  • Shift left register
  • Address register
  • Pattern Generators
  • Shift register

Write a review

Note: HTML is not translated!
    Bad           Good