74ACTQ18823MTD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G56 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 100MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 80μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Propagation Delay (tpd) | 10 ns |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ACTQ18823MTD Overview
56-TFSOP (0.240, 6.10mm Width)is the way it is packaged. The Tubepackage contains it. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. JK flip flop belongs to the 74ACTQseries of FPGAs. A frequency of 100MHzshould not be exceeded by its output. The element count is 2 . There is 80μA quiescent consumption. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 4.5pFfarad input capacitance is used here. A device of this type belongs to the family of ACT. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. There are 2 ports embedded in the flip flops. Additionally, it is characterized by WITH CLEAR AND CLOCK ENABLE.
74ACTQ18823MTD Features
Tube package
74ACTQ series
74ACTQ18823MTD Applications
There are a lot of Rochester Electronics, LLC 74ACTQ18823MTD Flip Flops applications.
- Cold spare funcion
- High Performance Logic for test systems
- Latch-up performance
- Storage Registers
- Circuit Design
- Functionally equivalent to the MC10/100EL29
- Common Clocks
- ESD protection
- Storage registers
- Digital electronics systems
