74ACTQ273PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 189MHz |
| Base Part Number | 74ACTQ273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 189MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ273PC Overview
20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. In the configuration, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74ACTQ series. You should not exceed 189MHzin its output frequency. There are 1 elements in it. During its operation, it consumes 40μA quiescent energy. The 74ACTQ273 family contains it. Its input capacitance is 4.5pFfarads. A part of the electronic system is mounted in the way of Through Hole. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. There are 8bits in this flip flop. Despite its superior flexibility, it relies on 8 circuits to achieve it. Optimal efficiency requires a supply voltage of 5V. There are 8 output lines in this JK flip flop. Currently, there are 8 lines of input. -24mAis set as the high level output current. It is set to 24mAfor the low level output current. Ideally, the operating temperature should be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. A frequency of 189MHzcan be achieved.
74ACTQ273PC Features
Tube package
74ACTQ series
20 pins
8 Bits
74ACTQ273PC Applications
There are a lot of ON Semiconductor 74ACTQ273PC Flip Flops applications.
- Storage Registers
- ESCC
- Common Clocks
- Reduced system switching noise
- Buffered Clock
- Data storage
- Clock pulse
- Parallel data storage
- Data Synchronizers
- Synchronous counter
