Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Supplier Device Package |
20-SOP |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1999 |
Series |
74ACTQ |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~5.5V |
Base Part Number |
74ACTQ373 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Bits |
8 |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
6.5 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
6.5ns |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74ACTQ373SJ Overview
The 20-SOIC (0.209, 5.30mm Width) package contains it. A package of Tube has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. In the 74ACTQ series, this FPGA is located. 8 Bits are used in the design of this electronic part. This type belongs to the 74ACTQ373 family. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It contains 8 input lines where electronic circuits are present. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 1 elements are present in it. The circuit's superior flexibility is achieved through the use of 8 circuits. In the low level output current, the value is set to 24mA. It is set to zero for the high level output current. Lower than 85°C is the recommended operating temperature. Temperatures above -40°C should be used. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V.
74ACTQ373SJ Features
20-SOIC (0.209, 5.30mm Width) package
74ACTQ series
8 Bits
74ACTQ373 family
20 pins
1 elements
74ACTQ373SJ Applications
There are a lot of ON Semiconductor 74ACTQ373SJ Latches applications.
- Shift left with parallel loading
- Relay replacement
- Counter control
- Synchronous frequency dividers
- Parallel Output
- Clocks
- Display driver
- Parallel data storage
- Multistage ripple counting
- Serial Output Register