74ACTQ573SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 6.5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ573SCX Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74ACTQ series. It is designed with 8 bits. 74ACTQ573 is the family name of it. There are 20 pins on it. It is mounted according to the Surface Mount method. There are electronic circuits attached to the 8 input lines. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 3 output lines. In total, it has 1 elements. 8 circuits enable it to achieve high performance. 24mA is set as the low level output current. -24mA represents the high level output current. The operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. There is a maximum supply voltage of 5.5V supported by this device. A voltage of 4.5V is the minimum supply voltage required for it to operate.
74ACTQ573SCX Features
20-SOIC (0.295, 7.50mm Width) package
74ACTQ series
8 Bits
74ACTQ573 family
20 pins
1 elements
74ACTQ573SCX Applications
There are a lot of ON Semiconductor 74ACTQ573SCX Latches applications.
- Timers
- Frequency
- A/D converters
- Up-Down Johnson
- OC-48 communication systems
- Automotive Body Electronics
- Display
- Parallel data storage
- Watches
- Decade counting 7-segment decimal display
