74ACTQ652SPC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | MATTE TIN |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | COMMERCIAL |
| Output Type | 3-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Transceiver, Non-Inverting |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACTQ652SPC Overview
Logical driver uses a neat 24-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ACTQ series devices. 24 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a ACT family part that is attached to this electronic component. 24 pins are set with the electric part. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. To supply the device, a minimum voltage of 4.5V is a must. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need.
74ACTQ652SPC Features
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
74ACTQ652SPC Applications
There are a lot of Rochester Electronics, LLC 74ACTQ652SPC Buffers & Transceivers applications.
- Wireless communication
- Bar, KTV wireless entertainment
- interconnection between computers
- Changeing the frequency from IF to RF
- Data center
- Interconnection between switches and computers
- Vehicle, ship, aircraft navigation and positioning
- Ethernet circuitry
- Wireless transmission
- Fast Ethernet
