74ACTQ74PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 200MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Propagation Delay (tpd) | 8.6 ns |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74ACTQ74PC Overview
It is embeded in 14-DIP (0.300, 7.62mm) case. The Tubepackage contains it. It is configured with Differentialas an output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACTQseries of FPGAs. A frequency of 200MHzshould not be exceeded by its output. The list contains 2 elements. This process consumes 20μA quiescents. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The D flip flop is powered by a voltage of 5V . Its input capacitance is 4.5pFfarads. It belongs to the family of electronic devices known as ACT. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V.
74ACTQ74PC Features
Tube package
74ACTQ series
74ACTQ74PC Applications
There are a lot of Rochester Electronics, LLC 74ACTQ74PC Flip Flops applications.
- Shift Registers
- Circuit Design
- Power down protection
- Latch
- Differential Individual
- Clock pulse
- Storage Registers
- Bounce elimination switch
- Frequency Dividers
- Bus hold
