74ACTQ74SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Clock Frequency | 200MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ74SJ Overview
The package is in the form of 14-SOIC (0.209, 5.30mm Width). Package Tubeembeds it. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74ACTQ series. Its output frequency should not exceed 200MHz. In total, there are 2 elements. Despite external influences, it consumes 20μAof quiescent current. The 74ACTQ74family includes it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. A Positive Edgeclock edge trigger is used in this device. If high efficiency is desired, the supply voltage should be kept at 5V. A total of 1input lines have been provided.
74ACTQ74SJ Features
Tube package
74ACTQ series
14 pins
74ACTQ74SJ Applications
There are a lot of ON Semiconductor 74ACTQ74SJ Flip Flops applications.
- QML qualified product
- Synchronous counter
- Registers
- CMOS Process
- Bounce elimination switch
- ESCC
- Test & Measurement
- Single Down Count-Control Line
- Latch-up performance
- Divide a clock signal by 2 or 4
