74ACTQ74SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 200MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ74SJX Overview
The flip flop is packaged in a case of 14-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Differentialoutput configured with it. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74ACTQseries comprises this type of FPGA. A frequency of 200MHzshould be the maximum output frequency. There is 20μA quiescent consumption. This D latch belongs to the family of 74ACTQ74. A JK flip flop with a 4.5pFfarad input capacitance is used here. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. There is a clock edge trigger type of Positive Edgeon this device. The superior flexibility of this circuit is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. There are no output lines on the JK flip flop.
74ACTQ74SJX Features
Tape & Reel (TR) package
74ACTQ series
14 pins
74ACTQ74SJX Applications
There are a lot of ON Semiconductor 74ACTQ74SJX Flip Flops applications.
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- Data transfer
- Frequency division
- Buffered Clock
- Counters
- EMI reduction circuitry
- Bounce elimination switch
- ESCC
- Registers
