74ACTQ821SPC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 10 |
| Clock Frequency | 120MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ821SPC Overview
The flip flop is packaged in 24-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74ACTQseries comprises this type of FPGA. A frequency of 120MHzshould not be exceeded by its output. A total of 1elements are contained within it. This process consumes 80μA quiescents. The 74ACTQ821 family contains it. Its input capacitance is 4.5pF farads. Through Hole mounts this electronic component. There are 24pins on it. The clock edge trigger type for this device is Positive Edge. Using 10 circuits, it is highly flexible. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. To operate, the chip has a total of 3 output lines.
74ACTQ821SPC Features
Tube package
74ACTQ series
24 pins
74ACTQ821SPC Applications
There are a lot of ON Semiconductor 74ACTQ821SPC Flip Flops applications.
- Shift Registers
- Common Clocks
- Set-reset capability
- Guaranteed simultaneous switching noise level
- ATE
- Frequency division
- ESCC
- 2 – Bit synchronous counter
- Data Synchronizers
- Patented noise
