74ACTQ823SPC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Supplier Device Package | 24-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 9 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 9 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ823SPC Overview
24-DIP (0.300, 7.62mm)is the way it is packaged. A package named Tubeincludes it. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ACTQseries of FPGAs. The element count is 1 . Despite external influences, it consumes 80μAof quiescent current. D latch belongs to the 74ACTQ823 family. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic component mounted in the way of Through Hole. The 24pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. 9bits are used in its design. The superior flexibility is achieved through the use of 9 circuits. High efficiency requires the supply voltage to be maintained at 5V. It operates with 3 output lines. It has 9lines. -24mAis set as the high level output current. 24mAis set as the low level output current. Ideally, the operating temperature should be below 85°C. Temperatures above -40°Cshould be used. In order for it to operate, a supply voltage of 4.5Vis required. 5.5Vis the maximum supply voltage supported by it.
74ACTQ823SPC Features
Tube package
74ACTQ series
24 pins
9 Bits
74ACTQ823SPC Applications
There are a lot of ON Semiconductor 74ACTQ823SPC Flip Flops applications.
- Frequency Dividers
- Asynchronous counter
- Memory
- Counters
- Divide a clock signal by 2 or 4
- Automotive
- Bounce elimination switch
- Safety Clamp
- Shift Registers
- Differential Individual
