banner_page

74ACTQ843SPC

D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74ACTQ Series 74ACTQ843 24-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACTQ843SPC
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 748
  • Description: D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74ACTQ Series 74ACTQ843 24-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Supplier Device Package 24-PDIP
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACTQ
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACTQ843
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 9:9
Polarity Non-Inverting
Number of Circuits 9
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 9
Propagation Delay 9.5 ns
Turn On Delay Time 6.2 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 9
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 6.2ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ACTQ843SPC Overview


The package in which it is embedded is named 24-DIP (0.300, 7.62mm). Tube is the packaging method. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74ACTQ family. This electronic part is designed with 9 Bits. 74ACTQ843 is its family. 24 pins are used in its design. Through Hole is used to mount this electronic part. There are electronic circuits attached to the 9 input lines. Optimal efficiency requires 5V as the supply voltage. 3 output lines provide binary equivalents of input lines. This object is composed of 1 elements. The superior flexibility of the system is achieved through its use of 9 circuits. It is set to zero for the low level output current. It has been set to -24mA for the high level output current. Operating temperatures should be below 85°C. There should be a temperature above -40°C at which the device operates. Voltages up to 5.5V can be supplied. It operates with the minimal supply voltage of 4.5V.

74ACTQ843SPC Features


24-DIP (0.300, 7.62mm) package
74ACTQ series
9 Bits
74ACTQ843 family
24 pins
1 elements

74ACTQ843SPC Applications


There are a lot of ON Semiconductor 74ACTQ843SPC Latches applications.

  • Bus system register with enable parallel lines at bus side
  • Control circuits
  • Decade counting
  • Relay replacement
  • Sample and hold register
  • Counter
  • Parallel-to-Serial Data Conversion
  • Phase comparator
  • Registers
  • Avionics

Write a review

Note: HTML is not translated!
    Bad           Good