74AHC138PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC138 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 20.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 20.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC138PW,112 Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is in the form of Tube.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.With the 74AHC series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.As its base part number is 74AHC138, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 is found on this turn signal switch.It is the end of conductors that is represented by GULL WING.This supply type employs Single.With 16 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the AHC/VHC/H/U/V family.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.It consumes 4μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As a voltage level input, the multiplexers have 3 lines.Signal sources consist of output lines of 8.
74AHC138PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74AHC138PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHC138PW,112 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Code converters
- Seven segment displays
- Data demultiplexing
- Time division multiplexing system
- GLAN
- Make half adder
- Data-routing applications
- Relay
- Data distribution
