74AHC138S16-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 3 |
| Propagation Delay | 4.4 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 6 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC138S16-13 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.The operating temperature of -40°C~125°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~5.5V voltage.Since they are members of the 74AHC series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.A total of 16 pins are configured on this board.The mount is in Surface Mount.In the AHC/VHC/H/U/V family, the logic switch is included.As a result, signal multiplexer provides a total of 3 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.There is a power supply provided for the mux switch's normal operation of 2/5.5V.Decoder/Drivers is a category for the digital switch ics.It consumes 4μA current of multiplexer ic since it is not affected by external factors.Currently, the switches is packaged in accordance with the TAPE AND REEL method.To accept voltage levels, the multiplexers have6 input lines.There are 8 output lines designed to serve as the source of the signal.
74AHC138S16-13 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
6 input lines
8 output lines
74AHC138S16-13 Applications
There are a lot of Diodes Incorporated 74AHC138S16-13 Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Make full adder
- Night vision cameras
- To select different devices in microprocessor input
- RF-based home automation system
- Data collection system
- Decimal decoder
- Computer memory
- Code conversion
- Control unit of Central Processing unit (CPU)
