74AHC139D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Power Dissipation | 500mW |
| Propagation Delay | 18.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18.5 ns |
| Family | AHC |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC139D,118 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74AHC series multiplexers.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74AHC139, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 is found on this turn signal switch.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.In the AHC family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.The turn signal switch has 4 outputs designed for operation.It consumes 4μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.On the multiplexers, 2 input lines are provided for accepting voltage levels.
74AHC139D,118 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
2 input lines
74AHC139D,118 Applications
There are a lot of Nexperia USA Inc. 74AHC139D,118 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Idle motor
- A/D converters
- To select different task for memory in microprocessor memory systems
- HD surveillance system
- Time division multiplexing system
- Data-routing applications
- Automation system
- Signal router
- VGA
