74AHC157PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC157PW-Q100J Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.When digital controlled switch operates at 2V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74AHC series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74AHC157, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.There is a type of supply of Single.The board has 16 pins configured.The mounting is in the way of Surface Mount.The logic switch is included into the family of AHC/VHC/H/U/V.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There are 1 outputs designed for the operation of the turn signal switch.Not being affected by the external factors, consumes 4μA current of multiplexer ic.
74AHC157PW-Q100J Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74AHC157PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC157PW-Q100J Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- RF-based home automation system
- Data distribution
- Speed synchronization of multiple motors in industries
- Logic gates for other digital devices
- Medium scale TV wall
- Electronically controlled engine system
- To select different devices in microprocessor input
- Data collection system
- Encrypted communications system
