74AHC1G126SE-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AHC1G126 |
| Pin Count | 5 |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Operating Supply Current | 10μA |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 14.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.008 A |
| Control Type | ENABLE HIGH |
| Number of Input Lines | 1 |
| Schmitt Trigger Input | Yes |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC1G126SE-7 Overview
Logical driver uses a neat 5-TSSOP, SC-70-5, SOT-353 package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AHC series devices. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. AHC/VHC/H/U/V family part. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 5 pins. Enhanced with 2 ports. You can search "74AHC1G126" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 1μA. It is generally sold in TAPE AND REEL package. To supply the device, a minimum voltage of 2V is a must. 1 bits are included within the electrical component. Because of its 1 lines level input capability, buffer IC is more cost-effective on transimitting signals. Does the electronic component support schmitt trigger input? Yes. Bus transceiver operates on 10μA.
74AHC1G126SE-7 Features
Bus Driver/Transceivers
74AHC1G126SE-7 Applications
There are a lot of Diodes Incorporated 74AHC1G126SE-7 Buffers & Transceivers applications.
- Fast Ethernet
- LAN, SAN, WAN (local, storage, work area networks)
- Laser diode bonding
- Data center
- Fiber optic cable connection network
- Single to Multimode Fiber Conversion
- Clock radio
- Long-distance fiber optic network applications
- Wireless network systems
- Telecom and datacom networking applications
