74AHC1G66GV,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 22Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC1G66 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 75mA |
| Power Dissipation | 250mW |
| Max Supply Current | 75mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 35 ns |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 22Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 11ns, 11ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC1G66GV,125 Overview
The electrical component comes in SC-74A, SOT-753 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~125°C TA extended. The total number of terminations is 5. The electronic part provides high-quality output because it has 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 5 series. SPST - NO switching circuits are used in these analog switch ics. Using the 74AHC1G66 search parameter, you can discover variants of the switch. There is 22Ohm internal resistance in this digital multiplexer. To find out what the functions of 5 pins are, please refer to their datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2V. The switch device would be able to operate with 1μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. Put voltage above 75mA on the multiplexer to cause damage. This electrical part is compatible with 5V operating voltages. There are 1 inputs to be operated.
74AHC1G66GV,125 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz
74AHC1G66GV,125 Applications
There are a lot of Nexperia USA Inc. 74AHC1G66GV,125 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- 65 V DACs
- Cross Connects
- Audio and video signal routing
- USB 1.1 signal switching circuits
- Audio and video switching
- CSU
- Medical
- Sample hold systems
- HDTV
