74AHC1G66GW,165
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 22Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC1G66 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 75mA |
| Power Dissipation | 250mW |
| Max Supply Current | 75mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 35 ns |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 22Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 11ns, 11ns |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 2mm |
| RoHS Status | RoHS Compliant |
74AHC1G66GW,165 Overview
The electronic component is convenient to ship overseas because it is packed in a 5-TSSOP, SC-70-5, SOT-353. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~125°C TA extended. A total of 5 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 5 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Using the 74AHC1G66 search parameter, you can discover variants of the switch. A 22Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 5 pins functions. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 1μA current. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. If you put voltage higher than 75mA on the digital multiplexer, damage may occur. It can operate from 5V operating voltages. A 1 input needs to be operated.
74AHC1G66GW,165 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz
74AHC1G66GW,165 Applications
There are a lot of Nexperia USA Inc. 74AHC1G66GW,165 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Public switching systems
- RGB switches
- SONET
- Automatic test equipment
- USB 1.1 signal switching circuits
- Channelized and Unchannelized DS3 applications
- Precision instrumentation
- ATM
- Low-Voltage
