74AHC1G79GV-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74AHC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 1 |
| Clock Frequency | 90MHz |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 1μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| fmax-Min | 70 MHz |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC1G79GV-Q100H Overview
SC-74A, SOT-753is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. Currently, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74AHCseries of FPGAs. It should not exceed 90MHzin terms of its output frequency. The list contains 1 elements. As a result, it consumes 1μA of quiescent current without being affected by external factors. A total of 5terminations have been recorded. You can search similar parts based on 74AHC1G79. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 1.5pF farads. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. This board has 5 pins. An electronic part with 1bits has been designed. Normally, the supply voltage (Vsup) should be kept above 2V. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
74AHC1G79GV-Q100H Features
Tape & Reel (TR) package
74AHC series
5 pins
1 Bits
74AHC1G79GV-Q100H Applications
There are a lot of Nexperia USA Inc. 74AHC1G79GV-Q100H Flip Flops applications.
- Differential Individual
- Frequency Dividers
- Parallel data storage
- Set-reset capability
- Data Synchronizers
- Communications
- Storage registers
- Consumer
- Pattern generators
- Guaranteed simultaneous switching noise level
