74AHC1G79GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74AHC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 1 |
| Clock Frequency | 90MHz |
| Propagation Delay | 15.5 ns |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 1μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| fmax-Min | 70 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC1G79GW-Q100H Overview
It is packaged in the way of 5-TSSOP, SC-70-5, SOT-353. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis required for its operation. Temperature is set to -40°C~125°C TA. This electronic flip flop is of type D-Type. The 74AHCseries comprises this type of FPGA. Its output frequency should not exceed 90MHz. In total, it contains 1 elements. During its operation, it consumes 1μA quiescent energy. There are 5 terminations,JK flip flop belongs to 74AHC1G79 family. It is powered by a voltage of 5V . This JK flip flop has a 1.5pFfarad input capacitance. In terms of electronic devices, this device belongs to the AHC/VHC/H/U/Vfamily of devices. The electronic part is mounted in the way of Surface Mount. The 5pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. An electronic part with 1bits has been designed. The supply voltage (Vsup) should be kept above 2V for normal operation. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
74AHC1G79GW-Q100H Features
Tape & Reel (TR) package
74AHC series
5 pins
1 Bits
74AHC1G79GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74AHC1G79GW-Q100H Flip Flops applications.
- Synchronous counter
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- Automotive
- Clock pulse
- Computers
- Set-reset capability
- Matched Rise and Fall
- Latch
- Counters
