74AHC245BQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHC245 |
| Pin Count | 20 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Family | AHC/VHC/H/U/V |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Transceiver, Non-Inverting |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC245BQ-Q100X Overview
Logical driver uses a neat 20-VFQFN Exposed Pad package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the Automotive, AEC-Q100, 74AHC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the AHC/VHC/H/U/V family, the electric component belongs. 20 pins are set with the electric part. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. You can search "74AHC245" for other related electrical components. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must.
74AHC245BQ-Q100X Features
74AHC245BQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74AHC245BQ-Q100X Buffers & Transceivers applications.
- Cable network front end
- Single to Multimode Fiber Conversion
- Radio transmission
- Car radio
- AV receiver
- Fiber-to-the-desktop
- Transmission stations
- Wireless transmission
- Lamps
- Digital systems
