74AHC273D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74AHC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 110MHz |
| Propagation Delay | 21.5 ns |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC273D-Q100J Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. Currently, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74AHC series. Its output frequency should not exceed 110MHz. The element count is 1 . Despite external influences, it consumes 4μAof quiescent current. Currently, there are 20 terminations. If you search by 74AHC273, you will find similar parts. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 3pF farads. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. For high efficiency, the supply voltage should be kept at 5V.
74AHC273D-Q100J Features
Tape & Reel (TR) package
74AHC series
20 pins
74AHC273D-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC273D-Q100J Flip Flops applications.
- CMOS Process
- Buffered Clock
- Automotive
- Computers
- QML qualified product
- Single Up Count-Control Line
- Frequency Dividers
- Storage Registers
- Parallel data storage
- Event Detectors
