74AHC273D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 6 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC273D,118 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 110MHz. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. The 74AHC273family includes it. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3pF farads. Devices in the AHCfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. For normal operation, the supply voltage (Vsup) should be kept above 2V. If high efficiency is desired, the supply voltage should be kept at 5V. This T flip flop features a maximum design flexibility due to its output current of 25mA. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
74AHC273D,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC273D,118 Applications
There are a lot of Nexperia USA Inc. 74AHC273D,118 Flip Flops applications.
- ESD protection
- Data Synchronizers
- Power down protection
- Bounce elimination switch
- Safety Clamp
- Supports Live Insertion
- Storage Registers
- QML qualified product
- Frequency Dividers
- Clock pulse
