74AHC373D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Propagation Delay | 4.3 ns |
| Turn On Delay Time | 4 ns |
| Family | AHC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHC373D,112 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tube is the way in which it is packaged. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 2V~5.5V. During operation, the temperature is set at -40°C~125°C. This FPGA is part of the 74AHC series. It is designed with 8 bits. In this device, there are 20 terminations that have been designed. 74AHC373 is its family. In order to function, the supply voltage should be set to 5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of AHC. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. It is recommended to have a higher supply voltage (Vsup) than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Its output current of 25mA ensures maximum design flexibility. A high efficiency supply voltage should be maintained at 5V.
74AHC373D,112 Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
74AHC373D,112 Applications
There are a lot of Nexperia USA Inc. 74AHC373D,112 Latches applications.
- Automotive HEV/EV Powertrain
- Parallel data storage
- Buffer/Storage Registers
- Programmable binary
- Avionics
- Pseudo-random code generators
- Lamp and Display (LED)
- Frequency
- Meter applications
- Audio and video switching
