74AHC373PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 4.3 ns |
| Turn On Delay Time | 4 ns |
| Family | AHC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74AHC373PW,112 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Packaged in the way of Tube. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 2V~5.5V. A temperature of -40°C~125°C is set as the operating temperature. In the 74AHC series, this FPGA is located. The electronic part in this image has 8 bits. This device has 20 terminations. There is no doubt that it belongs to the family 74AHC373. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. This electronic device belongs to the family of AHC. It is designed with 20 pins. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits are represented by 8 input lines. High efficiency requires a voltage supply of 5V.
74AHC373PW,112 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
74AHC373PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHC373PW,112 Latches applications.
- Bus system register with enable parallel lines at bus side
- Storage
- Buffer register
- Ring counter
- BCD counting
- Counting
- Display driver
- Four-bit storage with output enable
- Network Switches
- Shift left register
