74AHC373PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4 ns |
| Family | AHC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC373PW,118 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~125°C is set as the operating temperature. The 74AHC series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. It belongs to 74AHC373 family. The device works with a voltage of 5V for its supply voltage. 20 pins are included. This electronic device belongs to the family of AHC. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. It is recommended that the supply voltage (Vsup) be greater than 2V. Input Lines consist of electronic circuits, and there are 8. It features maximum flexibility in design due to 25mA output current. Optimal efficiency requires 5V as the supply voltage. There are no external factors that affect it, so it consumes 4μA quiescent current.
74AHC373PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
74AHC373PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHC373PW,118 Latches applications.
- Ring counter
- Shift Registers
- Automotive Body Electronics
- Synchronous frequency dividers
- A/D and D/A conversion
- A/D converters
- Frequency dividing
- Counter
- Communication systems
- Relay
