74AHC374D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 8.4 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHC374D,118 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~5.5V volts. A temperature of -40°C~125°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74AHCseries of FPGAs. A frequency of 120MHzshould not be exceeded by its output. The list contains 1 elements. It consumes 4μA of quiescent 20terminations have occurred. If you search by 74AHC374, you will find similar parts. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 3pF farads. This D flip flop belongs to the family of AHC. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be above 2V. The flip flop has 2ports embedded within it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 25mA. Currently, there are 8 lines of input.
74AHC374D,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC374D,118 Applications
There are a lot of Nexperia USA Inc. 74AHC374D,118 Flip Flops applications.
- Control circuits
- Automotive
- Computing
- ESD protection
- Bounce elimination switch
- Data storage
- Set-reset capability
- Computers
- ESCC
- Counters
