74AHC374PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 20.5 ns |
| Turn On Delay Time | 8.4 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC374PW,118 Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 2V~5.5V volts. -40°C~125°C TAis the operating temperature. This D latch has the type D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. It should not exceed 120MHzin terms of its output frequency. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. 20terminations have occurred. The object belongs to the 74AHC374 family. It is powered by a voltage of 5V . Its input capacitance is 3pFfarads. Devices in the AHCfamily are electronic devices. It is mounted in the way of Surface Mount. 20pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. An electronic part designed with 8bits is used in this application. Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to ensure high efficiency, the supply voltage should remain at 5V. The number of input lines is 8.
74AHC374PW,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC374PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHC374PW,118 Flip Flops applications.
- Frequency Divider circuits
- Automotive
- CMOS Process
- Computing
- High Performance Logic for test systems
- Computers
- Latch
- Storage registers
- ATE
- Registers
