74AHC377PW,112
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
74AHC377PW,112 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tubepackage. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. It is operating at -40°C~125°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AHC series. You should not exceed 120MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. The object belongs to the 74AHC377 family. It is powered by a voltage of 5V . This JK flip flop has a 3pFfarad input capacitance. In terms of electronic devices, this device belongs to the AHCfamily of devices. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. The design is based on 8bits. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V.
74AHC377PW,112 Features
Tube package
74AHC series
20 pins
8 Bits
74AHC377PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHC377PW,112 Flip Flops applications.
- Parallel data storage
- Differential Individual
- Modulo – n – counter
- CMOS Process
- Storage Registers
- Communications
- Cold spare funcion
- Buffered Clock
- Individual Asynchronous Resets
- Asynchronous counter
