74AHC377PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 3.9 ns |
| Turn On Delay Time | 8 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC377PW,118 Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AHC series. In order for it to function properly, its output frequency should not exceed 120MHz. A total of 1 elements are present. This process consumes 4μA quiescents. A total of 20 terminations have been made. The 74AHC377 family contains it. The power supply voltage is 5V. A 3pFfarad input capacitance is provided by this T flip flop. AHCis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 8bits. Normally, the supply voltage (Vsup) should be kept above 2V. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. This T flip flop features a maximum design flexibility due to its output current of 25mA. Currently, there are 8 lines of input.
74AHC377PW,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC377PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHC377PW,118 Flip Flops applications.
- Circuit Design
- Single Up Count-Control Line
- Counters
- Data Synchronizers
- QML qualified product
- ESD performance
- Cold spare funcion
- Load Control
- Individual Asynchronous Resets
- Asynchronous counter
