Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Series |
Automotive, AEC-Q100, 74AHC |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74AHC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Min (Vsup) |
2V |
Number of Ports |
2 |
Number of Bits |
8 |
Quiescent Current |
4μA |
Turn On Delay Time |
3.9 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74AHC573D-Q100J Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 2V~5.5V. It operates at -40°C~125°C degrees Celsius. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74AHC series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. This type belongs to the 74AHC573 family. With the supply voltage set at 5V, it is able to operate. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of AHC/VHC/H/U/V. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. A voltage greater than 2V must be supplied as a power supply (Vsup). High efficiency requires a voltage supply of 5V. The current consumed by the device is 4μA volts in quiescent mode, which cannot be affected by external factors.
74AHC573D-Q100J Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
74AHC573D-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC573D-Q100J Latches applications.
- Shift right register
- Synchronous frequency dividers
- Avionics
- Counter
- Automotive Infotainment
- BCD counting
- Up/down difference counting
- OC-48 communication systems
- Data acquisition
- Four-bit storage with output enable