74AHC573D,112
| Parameters | |
|---|---|
| Delay Time - Propagation | 3.9ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~5.5V |
| Base Part Number | 74AHC573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 19.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 3.9 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
74AHC573D,112 Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. The operating temperature is -40°C~125°C. An FPGA in this series belongs to the 74AHC family. The design of this electronic part contains 8 bits. As a member of the 74AHC573 family, it falls under that category. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Optimal efficiency requires 5V as the supply voltage. Input lines are converted into binary equivalents by 8 output lines. Without external influences, it consumes 4μA of quiescent current. The element count is 1. The circuit's superior flexibility is achieved through the use of 8 circuits. It is set to zero for the low level output current. The high level output current is set to -8mA. Ideally, the temperature should not be higher than 125°C. It is recommended that the operating temperature be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. There is a minimum supply voltage of 2V for it.
74AHC573D,112 Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pins
1 elements
74AHC573D,112 Applications
There are a lot of Nexperia USA Inc. 74AHC573D,112 Latches applications.
- PCs and Notebooks
- Pattern Generators
- Automotive Body Electronics
- General-Purpose Register
- Phase comparator
- OC-48 communication systems
- Buffer/Storage Registers
- Double bus register system
- Shift left with parallel loading
- Shift left register
