74AHC573PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100, 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Quiescent Current | 4μA |
| Turn On Delay Time | 3.9 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC573PW-Q100J Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. The output it is configured with uses Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. The family it belongs to is 74AHC573. With the supply voltage set at 5V, it is able to operate. It has 20 pins that makes it easy to use. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. There are 20 pins on it. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. Ensure that the supply voltage (Vsup) is greater than 2V. A high efficiency supply voltage should be maintained at 5V. Aquiescent current is consumed by 4μA without being affected by external forces.
74AHC573PW-Q100J Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
74AHC573PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC573PW-Q100J Latches applications.
- Stacked or Push-Down Registers
- High-speed logic
- Automotive Body Electronics
- A/D and D/A conversion
- Phase comparator
- Display
- Timers
- Hammer Device Information
- PCs and Notebooks
- Automotive Infotainment
