74AHC574BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Turn On Delay Time | 9 ns |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC574BQ,115 Overview
It is packaged in the way of 20-VFQFN Exposed Pad. Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~5.5V is required for operation. Temperature is set to -40°C~125°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. Its output frequency should not exceed 115MHz. The list contains 1 elements. There is a consumption of 4μAof quiescent energy. Currently, there are 20 terminations. If you search by 74AHC574, you will find similar parts. An input voltage of 5Vpowers the D latch. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of AHC/VHC/H/U/V. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. An electronic part designed with 8bits is used in this application. A normal operating voltage (Vsup) should remain above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. A D flip flop with 2embedded ports is available. If high efficiency is to be achieved, the supply voltage should be maintained at 5V.
74AHC574BQ,115 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC574BQ,115 Applications
There are a lot of Nexperia USA Inc. 74AHC574BQ,115 Flip Flops applications.
- Bus hold
- Computers
- Pattern generators
- ESCC
- ESD performance
- Power down protection
- Modulo – n – counter
- Data transfer
- ATE
- Latch
