74AHC574PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC574PW,118 Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. It belongs to the 74AHCseries of FPGAs. You should not exceed 115MHzin its output frequency. In total, it contains 1 elements. A total of 20terminations have been recorded. This D latch belongs to the family of 74AHC574. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 3pF farads. Devices in the AHC/VHC/H/U/Vfamily are electronic devices. Surface Mount mounts this electronic component. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. Flip flops designed with 8bits are used in this part. Normal operation requires a supply voltage (Vsup) above 2V. The flip flop has 2embedded ports. If high efficiency is desired, the supply voltage should be kept at 5V. The 25mA output current allows it to be designed with the greatest amount of flexibility. Currently, there are 8 lines of input. There is a consumption of 4μAof quiescent current from it. In addition, BROADSIDE VERSION OF 374is a characteristic of it.
74AHC574PW,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC574PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHC574PW,118 Flip Flops applications.
- Cold spare funcion
- Instrumentation
- Supports Live Insertion
- ESD protection
- Data Synchronizers
- Consumer
- Patented noise
- Safety Clamp
- Pattern generators
- Bus hold
