Parameters |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74AHCT138 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Propagation Delay |
14.5 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
14.5 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Number of Input Lines |
3 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Input Conditioning |
STANDARD |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2013 |
Series |
74AHCT |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Decoder/Demultiplexer |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
74AHCT138PW,112 Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature of -40°C~125°C will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.The basic configuration of this system includes 16 terminations.The base part number is 74AHCT138, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.A component pin count of 16 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the AHCT/VHCT/VT family.Without the influence of external factors, it consumes 4μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The multiplexers have 3 input lines used to accept voltage levels.A signal source is provided by 8 output lines.
74AHCT138PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74AHCT138PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT138PW,112 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Signal router
- Injectors
- Video transmission
- Time division multiplexing system
- Analog, digital or video signal switching
- Idle motor
- Used to connect a single source to multiple destinations
- Make full adder
- Frequency multiplexing system