74AHCT139PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT139 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Quiescent Current | 4μA |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Screening Level | AEC-Q100 |
| Propagation Delay (tpd) | 11.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT139PW-Q100J Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Decoder/Demultiplexer is used.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74AHCT series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 16 terminations.There is a base part number 74AHCT139 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.A component pin count of 16 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.The board has 16 pins configured.Surface Mount is the way it is mounted.There is a family of AHCT/VHCT/VT members.Without external influences, it consumes 4μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.
74AHCT139PW-Q100J Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74AHCT139PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHCT139PW-Q100J Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Data communication
- Idle motor
- Time division multiplexing system
- Memory chips
- GLAN
- Enabling block of memory depending on address in memory chips
- Paper plants
- Signal router
- CNC machines
