74AHCT16373DGGRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 16 |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 10.5 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT16373DGGRG4 Overview
48-TFSOP (0.240, 6.10mm Width) contains it. A Tape & Reel (TR) package is used to package it. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. In order for it to operate, it needs a supply voltage of 2V~5.5V. During operation, the temperature is set at -40°C~85°C. An FPGA in this series belongs to the 74AHCT family. There are 16 bits in this electronic part. This device has been designed with 48 terminations available. 74AHCT16373 is its family. It operates with a supply voltage of 5V. 48 pins are available on it. It is part of the family of electronic devices called AHCT/VHCT/VT. The pin configuration of the device is 48. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. As a result of its reliable performance, it is well suited for TR. Due to its 8mA output current, it offers maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. Input lines are converted into binary equivalents by 16 output lines. It consumes 4μA of quiescent current without being affected by external factors. A total of 2 elements are contained in it. A maximal power current (ICC) is generated for its operation at 0.04mA.
74AHCT16373DGGRG4 Features
48-TFSOP (0.240, 6.10mm Width) package
74AHCT series
16 Bits
74AHCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
74AHCT16373DGGRG4 Applications
There are a lot of Texas Instruments 74AHCT16373DGGRG4 Latches applications.
- Audio and video switching
- Up/down difference counting
- Shift right register
- Shift register
- Sample and hold register
- Phase comparator
- Relay
- Data acquisition
- Parallel data synchronization
- Timers
