74AHCT1G06GW,125
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 5 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Terminal Finish | TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 9 ns |
| Family | AHCT/VHCT |
| Logic Function | Buffer, Inverter |
| Output Characteristics | OPEN-DRAIN |
| Low Level Output Current | 8mA |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AHCT1G06GW,125 Overview
As the part is packed in TSSOP, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). Total terminations are 5. Users will benefit significantly from 1 functions in this part. There is a chip in this package that is a part of AHCT/VHCT. A total of 5 pins are injected into the body of the part. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. For functions related to 5 pins, please refer to the datasheets. Quiescent parts carry 1μA current. A 1 circuit is present in this device. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts. The device should not operate under environment where temperature is higher than 125°C. It is estimated that the minimal operating temperature of the part is -40°C. A voltage higher than 5.5V should not be supplied to the device in normalcircumstances. A low voltage of 4.5V should be applied to the part.
74AHCT1G06GW,125 Features
AHCT/VHCT Family
Quiescent Current: 1μA
74AHCT1G06GW,125 Applications
There are a lot of NXP USA Inc. 74AHCT1G06GW,125 Gates and Inverters applications.
- Residual current/leakage current protection
- CD player
- Electrical tools
- Fax machine
- Game console
- Solar energy generation
- Refrigerator
- Roof distributed power station
- MPPT function (maximum power point tracking)
- Sewing machine
