74AHCT1G66GV,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 22Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT1G66 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 75mA |
| Power Dissipation | 250mW |
| Max Supply Current | 75mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 11 ns |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 22Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 11ns, 11ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT1G66GV,125 Overview
Packed in SC-74A, SOT-753, the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. 5 terminations have been made so far. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 5 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Using the 74AHCT1G66 search parameter, you can discover variants of the switch. This digital multiplexer has 22Ohm internal resistance. For details about the functions of 5 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 4.5V. This digital switch can be operated with a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 75mA. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 1 inputs.
74AHCT1G66GV,125 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz
74AHCT1G66GV,125 Applications
There are a lot of Nexperia USA Inc. 74AHCT1G66GV,125 Analog Switches & Multiplexers ICs applications.
- Multiplexers
- DSLAMs
- Precision instrumentation
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Avionics
- Fiber In The Loop (FITL)
- Industrial and process control systems
- Audio signal routing
- Industrial control systems
- Channel Banks
