74AHCT1G79GW,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHCT |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Output Current | 8mA |
| Number of Bits | 1 |
| Clock Frequency | 90MHz |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop, Inverter |
| Current - Quiescent (Iq) | 1μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Number of Output Lines | 1 |
| fmax-Min | 70 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT1G79GW,125 Overview
It is packaged in the way of 5-TSSOP, SC-70-5, SOT-353. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The 74AHCTseries comprises this type of FPGA. You should not exceed 90MHzin its output frequency. During its operation, it consumes 1μA quiescent energy. The number of terminations is 5. The 74AHCT1G79family includes it. The power supply voltage is 5V. The input capacitance of this JK flip flopis 1.5pF farads. An electronic device belonging to the family AHCT/VHCTcan be found here. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 5. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 1 Bits. The superior flexibility of this circuit is achieved by using 1 circuits. High efficiency requires the supply voltage to be maintained at 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. In order for the chip to function, it has 1output lines.
74AHCT1G79GW,125 Features
Tape & Reel (TR) package
74AHCT series
5 pins
1 Bits
74AHCT1G79GW,125 Applications
There are a lot of Nexperia USA Inc. 74AHCT1G79GW,125 Flip Flops applications.
- Patented noise
- Bus hold
- Safety Clamp
- Test & Measurement
- Instrumentation
- Balanced 24 mA output drivers
- ESD performance
- Set-reset capability
- Asynchronous counter
- Matched Rise and Fall
