74AHCT240PW-Q100J
| Parameters | |
|---|---|
| Polarity | Inverting |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80μA |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 4μA |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Inverting |
| Number of Bits per Element | 4 |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100, 74AHCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74AHCT240 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
74AHCT240PW-Q100J Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the Automotive, AEC-Q100, 74AHCT series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. The bus transceiver employs 4 bits for each element. You can search "74AHCT240" for other related electrical components. In quiescent state, the electronic part uses 4μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct 8mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Wireless transceiver is able to output 8 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be 20-TSSOP.
74AHCT240PW-Q100J Features
High Level Output: 8mA
Low Level Output: 8mA
74AHCT240PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHCT240PW-Q100J Buffers & Transceivers applications.
- Single fiber bidirectional application
- TV signal transmission
- Radio transmission
- Switching system
- Structural bonding
- Satellite communication
- Data center
- WDM transmission
- Wireless HD Photography
- Military satellite communications
