74AHCT273PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5.8 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| fmax-Min | 65 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AHCT273PW,112 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tubepackage. The output it is configured with uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74AHCTseries contain this type of chip. It should not exceed 75MHzin terms of its output frequency. The list contains 1 elements. T flip flop consumes 4μA quiescent energy. There are 20 terminations,Members of the 74AHCT273family make up this object. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3pF farads. The electronic device belongs to the AHCT/VHCTfamily. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. It is designed with 8bits. High efficiency requires the supply voltage to be maintained at 5V. As of now, there are 8input lines.
74AHCT273PW,112 Features
Tube package
74AHCT series
20 pins
8 Bits
74AHCT273PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT273PW,112 Flip Flops applications.
- Automotive
- Individual Asynchronous Resets
- Circuit Design
- Counters
- Safety Clamp
- Digital electronics systems
- Control circuits
- Latch-up performance
- Test & Measurement
- CMOS Process
