74AHCT374D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 4.3 ns |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT374D,118 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74AHCT series. Its output frequency should not exceed 130MHz. The element count is 1 . T flip flop consumes 4μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74AHCT374 family. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3pF farads. Devices in the AHCT/VHCTfamily are electronic devices. Electronic part Surface Mountis mounted in the way. It is designed with 20 pins. In this device, the clock edge trigger type is Positive Edge. It is designed with 8bits. The flip flop has 2embedded ports. If high efficiency is desired, the supply voltage should be kept at 5V. As a result of its output current of 25mA, it is very flexible in terms of design. It is reported that there are 8 input lines.
74AHCT374D,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT374D,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT374D,118 Flip Flops applications.
- Supports Live Insertion
- Balanced 24 mA output drivers
- Convert a momentary switch to a toggle switch
- Event Detectors
- Individual Asynchronous Resets
- Instrumentation
- ATE
- Consumer
- Bounce elimination switch
- Memory
