74AHCT374PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT374PW,112 Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at -40°C~125°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74AHCTseries of FPGAs. You should not exceed 130MHzin the output frequency of the device. The list contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Terminations are 20. The object belongs to the 74AHCT374 family. A voltage of 5V provides power to the D latch. A 3pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family AHCT/VHCTcan be found here. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is designed with a number of bits of 8. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This input has 8lines.
74AHCT374PW,112 Features
Tube package
74AHCT series
20 pins
8 Bits
74AHCT374PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT374PW,112 Flip Flops applications.
- 2 – Bit synchronous counter
- Divide a clock signal by 2 or 4
- Differential Individual
- Balanced 24 mA output drivers
- Counters
- Set-reset capability
- Clock pulse
- High Performance Logic for test systems
- Parallel data storage
- Single Down Count-Control Line
