74AHCT374PW,118
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
74AHCT374PW,118 Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. The 74AHCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 130MHz. A total of 1elements are contained within it. It consumes 4μA of quiescent A total of 20terminations have been recorded. This D latch belongs to the family of 74AHCT374. The power source is powered by 5V. This T flip flop has a capacitance of 3pF farads at the input. Electronic devices of this type belong to the AHCT/VHCTfamily. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There are 8bits in its design. The flip flop has 2embedded ports. High efficiency requires the supply voltage to be maintained at 5V. The 25mA output current allows it to be designed with the greatest amount of flexibility. As of now, there are 8input lines.
74AHCT374PW,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT374PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT374PW,118 Flip Flops applications.
- Computing
- Latch
- Communications
- CMOS Process
- Event Detectors
- Memory
- Power down protection
- Set-reset capability
- EMI reduction circuitry
- Reduced system switching noise
